F-Gas Regulation : Training and Certification Requirements for High Voltage Electrical Switchgear

F-Gas Regulation : Training and Certification Requirements for High Voltage Electrical Switchgear

EU F-Gas Regulation Guidance Information Sheet 24: Training and Certification Requirements for High Voltage Electrical Switchgear

This information Sheet is aimed at individuals and organisations that carry out SF6 handling operations related to high voltage switchgear.

The guidance will also be useful for operators of equipment using F-Gases that need to use certificated technicians for installation and maintenance.

1. Background

This guidance is for organisations affected by the 2014 EU F-Gas Regulation (517/2014). The F-Gas Regulation creates controls on the use and emissions of fluorinated greenhouse gases (F-Gases) including HFCs, PFCs and SF6. The 2014 EU F-Gas Regulation replaces the 2006 Regulation, strengthening all of the 2006 requirements and introducing a number of important new measures.

Training and certification is an important feature of the F-Gas Regulation as it ensures that technicians understand how to minimise emissions during installation, maintenance and at end-of-life of equipment containing F-Gases.

This Information Sheet describes the requirements that apply to training and certification related to high voltage electrical switchgear using SF6

Further guidance is available – see Information Sheet 30 for a full list and for a glossary of terms

2. Personnel Training and Certification – General Requirements

Activities covered by personnel training requirements

Personnel involved in certain activities on equipment that contains or is designed to contain F-Gases require an F-Gas handling training qualification. In particular, this applies to:

  • Installation
  • Maintenance or servicing
  • F-Gas recovery
  • Decommissioning 

Sectors requiring mandatory personnel training

The end user sectors for which these training requirements apply includes high voltage electrical switchgear – this means electrical equipment of any size that contains SF6.

Who should hold a personnel training certificate?

All technicians that carry out the activities detailed above on high voltage electrical equipment containing SF6 must hold an F-Gas handling certificate. This requirement applies both to in-house staff and to personnel employed by external contractors.

An appropriate qualification for personnel working on these systems can only be awarded by an approved certification and evaluation body. These are bodies that have been approved by the UK Government, as detailed in GB Statutory Instrument 261/20091.

Scope of personnel training

The F-Gas Regulation requires all EU Member States to provide suitable training programmes for personnel working in these areas. The training programmes must cover:

  • applicable regulations and technical standards
  • emission prevention
  • recovery of fluorinated greenhouse gases
  • safe handling of equipment of the type and size covered by the certificate
  • NEW: information on relevant technologies to replace or to reduce the use of fluorinated greenhouse gases and their safe handling.

The detailed scope of training is defined in European Commission Regulations published to support the 2006 F-Gas Regulation. These Regulations are still valid. The relevant training Regulation is:

  • Regulation EC/305/2008  - High voltage switchgear

This Commission Regulation specifies the required practical skills and theoretical knowledge and it specifies the conditions for mutual recognition of certificates between EU Member States.

Validity of existing personnel certificates

Existing certificates issued in accordance with the 2006 EU F-Gas Regulation remain valid, in accordance with the conditions under which they were originally issued.

It is important to note that the training requirements have been slightly extended in the 2014 Regulation, but this will not invalidate any existing certificates. Member States need to ensure that all personnel holding existing certificates have access to information regarding each of the following:

  • relevant technologies to replace or to reduce the use of F-Gases and their safe handling
  • existing regulatory requirements for working with equipment containing alternative refrigerants to F-Gases

It is not yet clear how this requirement will be fulfilled in the UK. It is likely that standard information material will be prepared by experts and circulated to certificate holders via Certification Bodies or training centres. 

Note: Statutory Instrument is being replaced, although it is still in force in the first quarter of 2015. A new SI will replace it during 2015; it is not expected that the list of approved bodies will change.

3. Personnel Training and Certification – Requirements for Switchgear

UK Personnel Certification and Evaluation Bodies for Switchgear

Personnel wishing to undertake installation, servicing and maintenance on high voltage electrical switchgear containing SF6 must obtain one of the qualifications listed in Table 1.

Table 1 Details of Certification and Evaluation Bodies and Qualifications offered 

4. Other Related Information

NEW: Purchase of F-Gases

The F-Gas Regulation states that:

“Bulk supplies of F-Gases shall only be sold to and purchased by undertakings that hold the relevant certificates or attestations”

Companies selling F-Gases will need to screen their customers to ensure compliance with this requirement. In most cases the required proof is a Company Certificate. See Information Sheet 19 for further details about customer screening.

Exemption from Personnel Certification

The following exemption applies to trainees:

  • Trainees are exempt for up to 1 year, but they must work under the supervision of a technician with a valid F-Gas personnel qualification and must be enrolled on a relevant training course to obtain an appropriate F gas qualification.

What is the status of a non-UK personnel qualification?

The EC F-Gas Regulation requires that Member States give mutual recognition to certification of suitable qualifications from other EU countries. This will applies to certificates that meet the minimum requirements specified in Commission Regulation EC/304/2008. The European Commission has published a list of qualifications that meet the minimum requirements. 

This Information Sheet has been prepared by Gluckman Consulting in collaboration with the Defra (UK Department for Environment, Food and Rural Affairs) and Jacobs

This document contains the best information available to date and will be updated as more or different information is made available. It does not seek to provide a definitive view on the legal requirements; only the courts can provide such a view. If there are uncertainties you should always refer to the text of the Regulation and seek qualified legal advice.

To find out more about Gluckman Consulting visit


Fridgehub, providing information and resources to Refrigeration, Air Conditioning and Heat Pump Suppliers, Contractors and Retail Business Operators

Visit the Fridgehub App StoreBecome a member of the Fridgehub communitySign up and register your Company in the Fridgehub directory


  • Resources
  • F-Gas Regulations

Share this story

Please register or sign in to leave a comment